To change the water filter on a Kenmore refrigerator, follow these general steps. Keep in mind that the specific procedure may vary depending on the Kenmore refrigerator model you have, so it’s advisable to consult your refrigerator’s user manual for model-specific instructions. Here’s a general guideline:
Note: Before starting, ensure you have a compatible replacement water filter for your Kenmore refrigerator. The filter model number is often printed on the filter itself or can be found in your refrigerator’s manual.
https://helixplanet.com/how-to-change-gender-in-prodigy-2022/
https://helixplanet.com/how-to-change-gmc-key-fob-battery/
- Locate the Water Filter Compartment:
- Open the refrigerator door and find the water filter compartment. It is typically located either in the upper right or upper left corner of the refrigerator’s interior.
- Prepare for the Filter Replacement:
- Before removing the old filter, it’s a good practice to turn off the water supply to the refrigerator. Some refrigerators have a water shutoff valve on the water supply line, which you can turn to the “Off” position. If you can’t find a shutoff valve, consider turning off the main water supply to the house.
- Remove the Old Water Filter:
- Depending on your refrigerator model, you may need to turn the filter counterclockwise, push a button, or use a release lever to disengage and remove the old water filter. Follow the instructions specific to your refrigerator model.
- Dispose of the Old Filter:
- Properly dispose of the old water filter. Most water filters can be recycled. Check your local recycling guidelines for disposal options.
- Prepare the New Water Filter:
- Remove the new water filter from its packaging. Some filters come with protective caps that need to be removed before installation. Check the instructions provided with the replacement filter.
- Install the New Water Filter:
- Insert the new water filter into the filter housing in the same orientation as the old filter. Follow the installation instructions provided with the replacement filter.
- Lock or Secure the Filter in Place:
- Depending on your refrigerator model, you may need to turn the filter clockwise, push it firmly, or engage a locking mechanism to secure the new filter in place. Ensure it is properly seated and locked.
- Turn On the Water Supply:
- If you turned off the water supply earlier, now is the time to turn it back on. Check for any leaks around the filter area and tighten connections if necessary.
- Purge Air from the System (if needed):
- After replacing the filter, you may need to run a few cups of water through the water dispenser to remove air from the system. This can help ensure the water flows smoothly and tastes fresh.
- Reset the Filter Indicator (if applicable):
- Some Kenmore refrigerators have a filter status indicator that tracks the usage of the water filter. Follow your refrigerator’s manual to reset the indicator or timer to zero or the appropriate setting.
- Verify Proper Operation:
- Test the water dispenser and check for any leaks around the filter area. Make sure the water flows without any issues.
That’s it! You have successfully changed the water filter on your Kenmore refrigerator. The frequency of filter replacement varies depending on your water quality and usage, so refer to your refrigerator’s manual for recommendations on when to replace the filter.
Also Read:
https://helixplanet.com/how-to-change-combination-on-winchester-gun-safe/
https://helixplanet.com/how-to-change-display-on-gmc-acadia/